Bill of materials for the Customer Hardware Solution – Large

To build your Customer Hardware Solution – Large Edge device, you must work with your preferred hardware vendor to acquire the HPE hardware components identified in the table. Each row in the table lists a hardware item, a recommended HPE product number, and, in case the recommended HPE product is unavailable, approved HPE alternative product numbers. Depending on the hardware item, the alternatives may show specific product numbers or indicate that you can use any HPE approved product. If no approved alternative exists, the alternative is marked as N/A.

Note: Only one Intel Xeon-Gold Processor is required. If the chassis you select comes with a processor, there is no need to purchase a second processor.

If you need more information on components or want to verify the components that you have purchased, see the HPE PartSurfer and search for the Product number. (On HPE PartSurfer, product numbers and part numbers may be different.)

Note: The Customer Hardware Solution – Large requires three (3) internal hard drives. The BYOC Premises – Customer Hardware Solution installer sets up two of the hard drives in a RAID 1 configuration and then sets up the third hard drive for support purposes. More specifically, the third drive stores local media used for factory image restoration and provides space for over-the-air operating system upgrades.
Hardware component HPE product number Alternative HPE product
DL360 G11 Rack Mountable Server Chassis

P52498-B21

Any HPE approved ProLiant DL360 G11 server or ProLiant DL380 G11 server.
One – Intel Xeon-Gold 5416S 2.0GHz 16-core 150W Processor

P49653-B21 (1)

N/A
Two – 16GB Memory Modules

P43322-B21 (2)

Any HPE approved Registered Smart Memory Kit configuration that provides a total of 32 GB.
Three – 1 TB Hard Drives

861686-B21 (3)

Any HPE approved 1 TB or 1.2 TB hard disks.

Smart Storage Battery

P01366-B21

Any HPE approved Smart Storage Battery.
Hardware Raid Controller

P58335-B21

Any HPE approved hardware Smart Array Modular Controller compatible with the selected chassis.

Warning: HPE software raid controllers are not supported.

Network card with at least two network ports†

P51181-B21

Any HPE approved network cards compatible with the selected chassis.

Fan

P48907-B21

Any HPE approved fan compatible with the selected chassis.

Two - Power Supplies

P38995-B21 (2)

Any HPE Power Supply Kit compatible with the selected chassis.

iLo License*

512485-B21

N/A

DL360 Internal Cable Kit

P48913-B21

N/A

DL360 Enable Kit

P51911-B21

N/A

Heat Sink Kit

P48904-B21

N/A

Rail Kit*

P52343-B21

N/A

3-year Ops Management*

R7A11AAE

N/A

† – If your chassis doesn’t come with built-in LAN / WAN ports

* – Optional

Notes:
  • Some items in the bill of materials may change due to hardware updates and changes in manufacturing. See the revision history for any changes.
  • Genesys recommends replacing Edge hardware after three years to remain on the most current technology.

After you have acquired your Customer Hardware Solution hardware and have it assembled, you are ready to set up your Edge. For more information, see Set up a Customer Hardware Solution Edge.

 

Modified date
(YYYY-MM-DD)		 Revision
2024-09-16

Added BOM for next generation hardware, which now features the DL360 G11 server powered by the 5th Gen Intel Xeon processor.

All new CHS Large and CHS Small devices now run on the Amazon Linux 2023 operating system. This update improves the installation process, especially in high-security network environments, and gives administrators greater control and improved access to logs. The new BOM allows pre-packaged Linux Edge appliances to use the CHS installer as an alternative to RMA and offers improved support with OS-level password management.
2023-08-31

Added BOM for next generation hardware and coming soon flag.
2023-06-07

Updated alternative chassis requirement, added a new alternative processor, updated alternative battery requirement, and added network cards for chassis that doesn’t come with LAN / WAN ports.
2023-02-01

Reorganized Table to more clearly display bill of materials.
2022-05-19

Added an official substitution for the Processor Kit for HPE ProLiant.
2022-04-13
  • Added six items to the list of official substitutions for the HPE Power Supply Kit.
  • Added an official substitution for the Registered Smart Memory Kit.
2022-03-31
  • Identified both Required and Optional items in the bill of materials. 
  • Added an official substitution for the HPE Smart Array.
2022-03-02

Added a third hard drive to the bill of materials. 
2022-02-16

With the introduction of the small version of the Customer Hardware Solution Edge, renamed this article to Bill of materials for the Customer Hardware Solution – Large.
2021-10-06

Published Customer Hardware Solution Bill of materials in the Resource Center.
2021-09-20

The Intel Xeon-Gold 5118 (860663-L21) Skylake CPU reached End of Life (EOL).

Replaced

Product Number: 860663-L21
HPE DL360 Gen10 Intel Xeon-Gold 5118 (2.3 GHz/12-Core/105 W) FIO Processor Kit

with

Product Number: P02592-B21
Intel Xeon-Gold 5218 (2.3GHz/16-core/125W) Processor Kit for HPE ProLiant DL360 Gen10)
2021-07-01

Original hardware components added to the Customer Hardware Solution bill of materials.