Manually configure the provisioning information for the Polycom SoundPoint IP phone

The most common method to configure the phones to discover the phone settings stored on the Genesys Cloud Edge is to enable DHCP on the phone. For more information, see Enable DHCP on the phone to discover the phone settings from the Edge.

You can also manually configure three settings on the physical phone for the phone to retrieve its configuration settings from the Edge:

  • Set the DHCP Boot Server to static
  • Set the Provisioning Server Type to HTTPS
  • Set the Provisioning Server Address to the provisioning URL

Note: Phone provisioning requires that a Polycom SoundPoint base setting exists in Genesys Cloud.

Manually configure the phone

  1. Press the Menu button.
  2. Press 3 for Settings.
  3. Press 2 for Advanced.
  4. Enter the Admin password.
    (default = 456, or default = 1234 if previously provisioned in Genesys Cloud)
  5. Press 1 for Admin Settings.Press 1 for Network Config.
  6. Press ✔︎ (checkmark button) to enter the Provisioning Server menu.
  7. Press ✔︎ (checkmark button) to enter the DHCP menu.
  8. Press ✔︎ (checkmark button) to enter the Boot Server menu.
  9. Select Static using the left and right arrow keys.
  10. Press OK  soft key.
  11. Press the Menu button to exit.
  12. Press Yes soft key to Save Config  (if prompted).
    Note: Setting the DHCP boot server to static overrides the use of DHCP Option 160 to find the boot server.

  1. Press the Menu button.
  2. Press 3 for Settings.
  3. Press 2 for Advanced.
  4. Enter the Admin password and press the Enter soft key.
    (default = 456, or default = 1234 if previously provisioned in Genesys Cloud)
    Note: You can change the default password in the phone management console. Go to Admin > Telephony > Phone Management > Base Settings > (choose phone model) > Phone Configuration > General > Administrative Password.
  5. Press 1 for Admin Settings.
  6. Press 1 for Network Config.
  7. Press the ✔︎ (checkmark button) to enter the Provisioning Server menu.
  8. Press the down arrow to highlight the Server Type setting
  9. Press the ✔︎ (checkmark button) to edit the Server Type.
  10. Select HTTPS using the left and right arrow keys.
  11. Press the OK soft key.
  12. Press the Menu button to exit.
  13. Press Yes soft key to Save Config (if prompted).

The provisioning URL for a local Edge is either:

  • The IP address and port (default = 80) of a local Edge, for example, 192.168.100.50:80
  • The domain address of the Edge if a DNS record exists for your Edges, for example, Customer-Domain.com/GenesysCloudEdges

For Genesys Cloud Voice use the appropriate phone provisioning endpoint address for your region: 

Region Phone Home Address
US East (N. Virginia) https://phone-home.use1.pure.cloud
US East (Ohio) https://phone-home.use2.us-gov-pure.cloud
US West (Oregon) https://phone-home.usw2.pure.cloud
Canada (Canada Central) https://phone-home.cac1.pure.cloud
South America (Sao Paulo) https://phone-home.sae1.pure.cloud
Europe (Frankfurt) https://phone-home.euc1.pure.cloud
Europe (Ireland) https://phone-home.euw1.pure.cloud
Europe (London) https://phone-home.euw2.pure.cloud
Europe (Zurich) https://phone-home.euc2.pure.cloud
Middle East (UAE) https://phone-home.mec1.pure.cloud
Asia Pacific (Tokyo) https://phone-home.apne1.pure.cloud
Asia Pacific (Mumbai) https://phone-home.aps1.pure.cloud
Asia Pacific (Seoul) https://phone-home.apne2.pure.cloud
Asia Pacific (Sydney) https://phone-home.apse2.pure.cloud
Asia Pacific (Osaka) https://phone-home.apne3.pure.cloud

To set the Provisioning Server Address

  1. Press the Menu button.
  2. Press 3 for Settings.
  3. Press 2 for Advanced.
  4. Enter the Admin password and press the Enter soft key.
    (default = 456, or default = 1234 if previously provisioned in Genesys Cloud)
  5. Press 1 for Admin Settings.
  6. Press 1 for Network Config.
  7. Press the ✔︎ (checkmark button) to enter Provisioning Server menu.
  8. Press the down arrow twice to highlight the ServerAddr setting.
  9. Press the ✔︎ (checkmark button) to edit the server address.
  10. Change text entry mode to URL by pressing the hash mark key (#).
  11. Enter your provisioning URL. Use repeated presses of number keys 0 – 9 to enter numerals and letters. Press the asterisk (*) key repeatedly to select punctuation such as periods (dots) and hyphens.
  12. Press the OK soft key.
  13. Press the Menu button to exit.
  14. Press Yes soft key to Save Config (if prompted).

Note: If your phone does not reboot automatically, you’ll need to manually reboot the phone:
    • Press the Menu button.
    • Press 3 for Settings.
    • Press 2 for Advanced.
    • Enter the Admin password and press the Enter soft key.
      (default = 456, or default = 1234 if previously provisioned in Genesys Cloud)
    • Press 3 for Reboot Phone.
    • Press the Yes soft key.

    1. View the phone in Genesys Cloud to verify that the phone is operational:
      • Log in with the telephony admin role and navigate to Telephony > Phone Management.
      • Find the phone in the Phone Name column and verify that a green status symbol displays.

    Polycom SoundPoint 335

    Troubleshoot a Polycom SoundPoint IP phone

    If you feel the phone’s settings have been misconfigured you can put the phone back to a factory default state. Doing so clears all settings allowing you to re-configure the DHCP and provision server settings in the phone.

    1. Press the Menu button.
    2. Press 3 for Settings.
    3. Press 2 for Advanced.
    4. Enter the Admin password and press the Enter soft key.
      (default = 456, or default = 1234 if previously provisioned in Genesys Cloud)
    5. Press 1 for Admin Settings.
    6. Press 5 for Reset to Defaults.
    7. Press 3 for Reset Dev(ice) Settings.
    8. Press the Yes soft key.

    If you do not know the Administrator password, try the default password “456” or the common Genesys Cloud default password “1234.” If these default passwords don’t work, reset the phone to the default factory settings. See Junction Networks knowledge base.