Install a VM Edge with an override parameter

When using BYOC Premises – Customer VM Solution and installing a VM Edge in a test or development environment, you can use an override parameter to complete the installation. This comes in handy if you do not have the required prerequisites, 

Using the override parameter prevents the installer from enforcing the checks meant to ensure audio quality and allows the installation of a virtual Edge on a host that does not meet the minimum system requirements. If it has been specified, the installer displays an alert that it detects this flag.

Warning: Do not use the override parameter in a production environment. 

Running the virtual Edge install script with the override parameter uses only two cores. However, the installation still requires 8GB RAM.

To complete the installation with the override parameter enabled, run the virtual Edge install script with the LowQ true parameter. Pass the parameter as -LowQ true

    1. Find the displayed line, 

      Type the full file name of the installer and press Enter.
    2. At the command line, at the end of the installer name, enter

      -LowQ true
    3. Refer to the following example,

      VM-Edge-Installer.msi -LowQ true